Loctite Metal Magic Steel - Epóxico De Restauración para pequeñas reparaciones

lang_en LOCTITE Metal Magic Steel is a steel filled epoxy repair putty. It is just a steel filled kneadable Stick so there is no need to mix with other products: kneading it, the putty begins a reaction and at the end becomes as hard as metal. In fact it adquires amazing properties: high compressive strength, chemical and corrosion resistance and good adhesion to most surfaces.
So the Metal Magic Steel CAN BE USED FOR MANY PURPOSES: the epoxy can stop leaks in pipes and tanks, fill oversized bolt holes, smooth welds and repair non-structural defects in castings holes in tanks. It can be a very useful and easy to use tool because with this kneadable Stick you can get very fast repairs thanks to its fixture time of only 10 minutes. While the working time lasts 3 minutes.

INSTRUCTIONS FOR USE: Dot not apply on surfaces above 66°C. Follow these 4 steps for a good and fast repair.
1. Clean and dry application surface, if possible. For maximum adhesion, clean and sand the surface.
2. Open the package and cut desired amount, remove the plastic film, roll briskly betweeen hands (with gloves), twist and knead until it gets a uniform colour.
3. Mould and apply it according to your purpose (patch, repair, bonding, reconstruction of small metallic parts...).
4. For a smooth finish, wet a cloth or finger with water and smooth the surface.
It can be drilled, filed and painted.
Resume of the features that distinguish this special putty in stick from the others:
It reacts even under water and adheres to most damp surfaces.
It adheres to most types of surfaces, if they are perfectly clean.
It is easy to use like a putty but in only 10 minutes it cures to a steel-like finish. Perfect for fast repairs.